DIY: How to remove the front bumper off a 2012 3rd gen Prius (also applies to 2012 Plug-in Prius aka PiP)

4

Posted by 5teve-0 | Posted in 2012 3rd Gen Toyota Prius Four | Posted on 23-06-2012

Tags: , , , , ,

Removing the bumper of the 2012 3rd gen Prius is pretty straight forward, just remove all the screws, clips and bolts securing the bumper onto the frame.  Unlike the RSX, the Prius has a total of 26-27 screws, bolts and clips to remove vs. the 11 clips and screws the RSX had (if I remember [...]

Read the rest of this entry »

DIY: Injen cold air intake installation guide for 2002-2006 Acura RSX Type-S manual 6-speed

1

Posted by 5teve-0 | Posted in 2005 Acura RSX Type S | Posted on 06-06-2010

Tags: , , , , , ,

Small update for June. Here is a comprehensive guide I've written back in January 2009 on how to install an Injen cold air intake system onto your 2002-2006 Acura RSX Type-S 6-speed. Allow approximately 2-3 hours to complete this project. Injen cold air intake parts check list 1 Injen Cold Air Intake system 1 2-7/8” [...]

Read the rest of this entry »