DIY: Honda OEM side marker lights install guide (video included) on your Acura RSX

0

Posted by 5teve-0 | Posted in 2005 Acura RSX Type S | Posted on 01-01-2010

Tags: , , , , , , ,

Most folks install side marker lights by cutting off the 2-pin female plug from the OEM side marker lights and splicing the two wires from the lights to the corresponding wires of the front signal lights. You can do this if you want, but the guide will show you how to execute an OEM-style install [...]

Read the rest of this entry »

DIY: How to add a UKDM Honda DC2 rear fog lamp to an RSX

9

Posted by 5teve-0 | Posted in 2005 Acura RSX Type S | Posted on 28-12-2009

Tags: , , , , , , , , ,

As with all my recent DIY guides, I try to keep the installation of non-OEM options appear as OEM as possible. With this in mind, the steps involved are meticulous and detailed. If you do not care for OEM-spec installation and just want to get the fog light functional, you can can simply skip the [...]

Read the rest of this entry »

EDM/UKDM DC2 rear fog light installed on a 2005 Acura RSX

0

Posted by 5teve-0 | Posted in 2005 Acura RSX Type S | Posted on 20-12-2009

Tags: , , , , , , , , , ,

I've seen '02-'04 Acura RSX with the rear fog light installed. To date, I have not seen an '05-'06 Acura RSX with the rear fog light installed. So, if you're wondering what it looks like on an '05+ RSX, click on the following image for an enlarged version: I decided to install the rear fog [...]

Read the rest of this entry »

DIY: Honda Access door visors installation guide

2

Posted by 5teve-0 | Posted in 2005 Acura RSX Type S | Posted on 05-12-2009

Tags: , , , , , ,

The Honda Access door visor is a handy accessory that allows you to cruise with your window slightly down without being blasted by wind noise. It's especially helpful during the rain as it allows the driver to roll the window down just enough to alleviate interior fog build up and keep the rain (or snow) [...]

Read the rest of this entry »