After rummaging through archives spanning back to 2005, I was able to salvage a couple of PDFs of DIY guides I’ve written for the RSX. I was also able to locate a couple of hi-res photos of the DIY write-up, which I will convert to entries subsequently. I’ve just been extremely busy to get caught up with converting these old guides into new entries, especially since I no longer own an RSX. Here’s what I’ve found so far but expect more to come:
- PDF: ’05-’06 Acura RSX rear JDM Type-S badge installation guide
- PDF: ’05-’06 Acura RSX rear JDM Honda Integra badge installation guide
- DIY: Touch-up paint basics
- DIY: ’02-’06 Acura RSX Lamin-X application guide
- DIY: ’05-’06 Acura RSX HID installation guide (McCulloch brand)
- DIY: ’05-’06 Acura RSX A-Spec high wing spoiler installation guide
- PDF: ’05-’06 Acura RSX JDM Type-S front grill badge installation guide
- PDF: ’05-’06 Acura RSX OEM fog light installation guide
- PDF: ’05-’06 Acura RSX taillight rewiring guide
These guides are pretty old so keep that in mind while you read through them. Be sure to message me or post your comments and/or question if anything doesn’t make a whole lot of sense. Enjoy.