After a long hiatus from blogging, due to time constraint, I am back and will start today’s entry off with a comprehensive do-it-yourself guide to wire up a pair of JDM DC5 Integra power folding mirrors onto your USDM Acura…
DIY: Honda OEM side marker lights install guide (video included) on your Acura RSX
Most folks install side marker lights by cutting off the 2-pin female plug from the OEM side marker lights and splicing the two wires from the lights to the corresponding wires of the front signal lights. You can do this…
DIY: How to add a UKDM Honda DC2 rear fog lamp to an RSX
As with all my recent DIY guides, I try to keep the installation of non-OEM options appear as OEM as possible. With this in mind, the steps involved are meticulous and detailed. If you do not care for OEM-spec installation…
EDM/UKDM DC2 rear fog light installed on a 2005 Acura RSX
I’ve seen ’02-’04 Acura RSX with the rear fog light installed. To date, I have not seen an ’05-’06 Acura RSX with the rear fog light installed. So, if you’re wondering what it looks like on an ’05+ RSX, click…
DIY: Honda Access door visors installation guide
The Honda Access door visor is a handy accessory that allows you to cruise with your window slightly down without being blasted by wind noise. It’s especially helpful during the rain as it allows the driver to roll the window…
DIY: How to add daytime running lights (DRL) to your RSX
This DIY mod has been updated, simplified and ported to 2010-2014 Toyota Prius. For updated instructions, read https://blog.machanon.net/2013/06/01/diy-how-to-add-daytime-running-lights-to-a-2010-2011-prius/ Ever wanted daytime running lights on your USDM Acura RSX, but can’t seem to find any do-it-yourself articles to execute the…
