Decided to use this weekend to apply a pair of yellow Lamin-X protective film onto our 2019 Hyundai Tucson’s foglight lens. I ordered the Lamin-X film designed for the 2016-2018 Tucson models because the 2019-2020 are not available from Lamin-X. The fog light lens are different before and after the 2019 mid-cycle refresh. The 2016-2018 models have an combo DRL/foglight lens in…
Tag: diy guide
DIY: How to change and replace the cabin filters in the Acura RSX
Here’s a simple DIY instruction on how to replace your interior cabin/heater blower air filter elements. The filters are located within the filter frame just above the glove box inside of your dashboard. The filter element part number is 80292-S5D-A01 and costs $10.97 each from Acura (you’ll need two). You can purchase aftermarket carbon activated filter elements for about the same…
DIY: Injen cold air intake installation guide for 2002-2006 Acura RSX Type-S manual 6-speed
Small update for June. Here is a comprehensive guide I’ve written back in January 2009 on how to install an Injen cold air intake system onto your 2002-2006 Acura RSX Type-S 6-speed. Allow approximately 2-3 hours to complete this project. Injen cold air intake parts check list 1 Injen Cold Air Intake system 1 2-7/8” x 3” 60 degree elbow…
DIY: How to remove the door panels off an Acura RSX
There are times when you need to access the door frame. Replacing your OEM speaker is usually the primary reason, but you may also need to remove the glass, replace the actuators or remove your mirror. This guide will show you how to remove the door panel from your Acura RSX. To remove your door panel, the only tools you…